Edge-Core ECS4660-28F Management Manual page 1637

This command specifies the Domain Name System (DNS) IP servers
dns-server
available to a DHCP client. Use the no form to remove the DNS server list.
S
YNTAX
dns-server address1 [address2]
no dns-server
D
EFAULT
None
C
OMMAND
DHCP Pool Configuration
U
SAGE
If DNS IP servers are not configured for a DHCP client, the client cannot
◆
correlate host names to IP addresses.
Servers are listed in order of preference (starting with address1 as the
◆
most preferred server).
E
XAMPLE
Console(config-dhcp)#dns-server 10.1.1.253 192.168.3.19
Console(config-dhcp)#
This command specifies the domain name for a DHCP client. Use the no
domain-name
form to remove the domain name.
S
YNTAX
domain-name domain
no domain-name
D
EFAULT
None
C
OMMAND
DHCP Pool Configuration
E
XAMPLE
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#
address1 - Specifies the IP address of the primary DNS server.
address2 - Specifies the IP address of the alternate DNS server.
S
ETTING
M
ODE
G
UIDELINES
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
S
ETTING
M
ODE
– 1637 –
| DHCP Commands
C 48
HAPTER
DHCP Server