Edge-Core ECS4660-28F Management Manual page 1635

C
OMMAND
If the DHCP server is running, you must restart it to implement any
configuration changes.
E
XAMPLE
Console(config)#service dhcp
Console(config)#
This command specifies the name of the default boot image for a DHCP
bootfile
client. This file should placed on the Trivial File Transfer Protocol (TFTP)
server specified with the
the boot image name.
S
YNTAX
bootfile filename
no bootfile
D
EFAULT
None
C
OMMAND
DHCP Pool Configuration
E
XAMPLE
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#
R
ELATED
next-server (1642)
This command specifies the client identifier of a DHCP client. Use the no
client-identifier
form to remove the client identifier.
S
YNTAX
client-identifier {text text | hex hex}
no client-identifier
D
EFAULT
None
U
SAGE
next-server
filename - Name of the file that is used as a default boot image.
S
ETTING
M
ODE
C
OMMANDS
text - A text string. (Range: 1-15 characters)
hex - The hexadecimal value.
S
ETTING
– 1635 –
| DHCP Commands
C 48
HAPTER
command. Use the no form to delete
DHCP Server