Edge-Core ECS4660-28F Management Manual page 1570

| CFM Commands
C 45
HAPTER
Defining CFM Structures
ma index name
This command creates a maintenance association (MA) within the current
maintenance domain, maps it to a customer service instance (S-VLAN),
and sets the manner in which MIPs are created for this service instance.
Use the no form with the vlan keyword to remove the S-VLAN from the
specified MA. Or use the no form with only the index keyword to remove
the MA from the current domain.
S
YNTAX
ma index index name ma-name [vlan vlan-id [mip-creation type]]
no ma index index [vlan vlan-id]
index – MA identifier. (Range: 1-2147483647)
ma-name – MA name. (Range: 1-44 alphanumeric characters)
vlan-id - Service VLAN ID. (Range: 1-4094)
type – Specifies the CFM protocol's creation method for
maintenance intermediate points (MIPs) in this MA:
default – MIPs can be created for this MA on any bridge port
through which the MA's VID can pass.
explicit – MIPs can be created this MA only on bridge ports
through which the MA's VID can pass, and only if a maintenance
end point (MEP) is created at some lower MA Level.
none – No MIP can be created for this MA.
D S
EFAULT ETTING
10 seconds
C M
OMMAND ODE
CFM Domain Configuration
C U
OMMAND SAGE
The maintenance domain used to enter CFM domain configuration
◆
mode, the MA name and VLAN identifier specified by this command,
and the DSAPs configured with the
create a unique service instance for each customer.
If only the MA index and name are entered for this command, the MA
◆
will be recorded in the domain database, but will not function. No MEPs
can be created until the MA is associated with a service VLAN.
Note that multiple domains at the same maintenance level (see the
◆
ethernet cfm domain
Also, each MA name must be unique within the CFM-managed network.
Before removing an MA, first remove all the MEPs configured for it (see
◆
the mep crosscheck mpid
If the MIP creation method is not defined by this command, the
◆
creation method defined by the
applied to this MA. For a detailed description of the MIP types, refer to
the Command Usage section under the
– 1570 –
mep crosscheck mpid
command) cannot have an MA on the same VLAN.
command).
ethernet cfm domain
ethernet cfm domain
command
command is
command.