Edge-Core ECS4660-28F Management Manual page 1861

neighbor
attribute-unchanged
neighbor
capability dynamic
This command configures certain route attributes to be kept unchanged for
transparent transmission to the specified neighbor. Use the no form to
disable this feature.
S
YNTAX
[no] neighbor {ip-address | group-name} attribute-unchanged
[as-path] [med] [next-hop]
ip-address – IP address of a neighbor.
group-name – A BGP peer group containing a list of neighboring
routers configured with the
as-path – AS path attribute
med – Mult-Exit Discriminator (MED) attribute
next-hop – Next hop attribute
C M
OMMAND ODE
Router Configuration
D S
EFAULT ETTING
Disabled
C U
OMMAND SAGE
If this command is entered without specifying any route attributes, then all
three optional attributes are used.
E
XAMPLE
Console(config-router)#neighbor 10.1.1.64 attribute-unchanged
Console(config-router)#
This command configures dynamic negotiation of capabilities between
neighboring routers. Use the no form to disable this feature.
S
YNTAX
[no] neighbor {ip-address | group-name} capability dynamic
ip-address – IP address of a neighbor.
group-name – A BGP peer group containing a list of neighboring
routers configured with the
C M
OMMAND ODE
Router Configuration
D S
EFAULT ETTING
Disabled
– 1861 –
| IP Routing Commands
C 51
HAPTER
Border Gateway Protocol (BGPv4)
neighbor peer-group command.
neighbor peer-group command.