Table of Contents
Advertisement
E
XAMPLE
To specify port 4, enter the following command:
Console(config)#interface ethernet 1/4
Console(config-if)#
This command configures an alias name for the interface. Use the no form
alias
to remove the alias name.
S
YNTAX
alias string
no alias
string - A mnemonic name to help you remember what is attached
to this interface. (Range: 1-64 characters)
D
EFAULT
None
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
The alias is displayed in the running-configuration file. An example of the
value which a network manager might store in this object for a WAN
interface is the (Telco's) circuit number/identifier of the interface.
E
XAMPLE
The following example adds an alias to port 4.
Console(config)#interface ethernet 1/4
Console(config-if)#alias finance
Console(config-if)#
This command advertises the port capabilities of a given interface during
capabilities
auto-negotiation. Use the no form with parameters to remove an
advertised capability, or the no form without parameters to restore the
default values.
S
YNTAX
[no] capabilities {flowcontrol | symmetric}
flowcontrol - Supports flow control
symmetric (Gigabit and 10 Gigabit only) - When specified, the port
transmits and receives symmetric pause frames.
S
ETTING
M
ODE
U
SAGE
– 1189 –
| Interface Commands
C
31
HAPTER
Interface Configuration
Advertisement
Chapters
Table of Contents
