Edge-Core ECS4660-28F Management Manual page 1895

This command shows routes permitted by a community list.
show ip
community-list
S
C
Privileged Exec
E
This command shows routes permitted by an extended community list.
show ip
extcommunity-list
S
C
Privileged Exec
Neighbor V AS MsgRcvd MsgSent
192.168.0.3 4 200
Total number of neighbors 1
Console#
YNTAX
show ip community-list [1-99 | 100-500 | community-list-name]
1-99 – Standard community list number that identifies one or more
groups of communities.
100-500 – Expanded community list number that identifies one or
more groups of communities.
community-list-name – Name of standard or expanded access list.
(Maximum length: 32 characters, no spaces or other special
characters)
M
OMMAND ODE
XAMPLE
Console#show ip community-list rd
Named Community standard list rd
permit 100:10
Console#
YNTAX
show ip extcommmunity-list [1-99 | 100-500 |
community-list-name]
1-99 – Standard community list number that identifies one or more
groups of communities.
100-500 – Expanded community list number that identifies one or
more groups of communities.
community-list-name – Name of standard or expanded access list.
(Maximum length: 32 characters, no spaces or other special
characters)
M
OMMAND ODE
– 1895 –
C
HAPTER
Border Gateway Protocol (BGPv4)
TblVer InQ OutQ Up/Down
166 168 0 0
| IP Routing Commands
51
State/PfxRcd
0 02:45:00 1