Table 167: Private Vlan Commands - Edge-Core ECS4660-28F Management Manual

.

Table 167: Private VLAN Commands

Command
Edit Private VLAN Groups
private-vlan
private vlan association
Configure Private VLAN Interfaces
switchport mode
private-vlan
switchport private-vlan
host-association
switchport private-vlan
mapping
Display Private VLAN Information
show vlan private-vlan
To configure private VLANs, follow these steps:
Use the
1.
VLANs and the primary VLAN that will channel traffic outside of the
community groups.
Use the
2.
VLAN(s) to the primary VLAN.
Use the
3.
promiscuous (i.e., having access to all ports in the primary VLAN) or
host (i.e., community port).
Use the
4.
port to a community VLAN.
Use the
5.
primary VLAN.
Use the
6.
settings.
Use this command to create a primary or community private VLAN. Use the
private-vlan
no form to remove the specified private VLAN.
S
YNTAX
private-vlan vlan-id {community | primary}
no private-vlan vlan-id
vlan-id - ID of private VLAN. (Range: 1-4094)
Function
Adds or deletes primary or community VLANs
Associates a community VLAN with a primary VLAN
Sets an interface to host mode or promiscuous mode
Associates an interface with a secondary VLAN
Maps an interface to a primary VLAN
Shows private VLAN information
private-vlan command to designate one or more community
private vlan association
switchport mode private-vlan
switchport private-vlan host-association
switchport private-vlan mapping
show vlan private-vlan
– 1367 –
| VLAN Commands
C 40
HAPTER
Configuring Private VLANs
command to map the community
command to configure ports as
command to assign a
command to assign a port to a
command to verify your configuration
Mode
VC
VC
IC
IC
IC
NE, PE