Edge-Core ECS4660-28F Management Manual page 1579

show ethernet cfm
maintenance-points
remote detail
Table 216: show ethernet cfm maintenance-points local detail mep - display
Field Description
Suppress Alarm Shows if the specified MEP is configured to suppress sending frames
containing AIS information following the detection of defect
conditions.
Suppressing Alarms Shows if the specified MEP is currently suppressing sending frames
containing AIS information following the detection of defect
conditions.
This command displays detailed CFM information about a remote MEP in
the continuity check database.
S
YNTAX
show ethernet cfm maintenance-points remote detail
{mac mac-address | mpid mpid}
[domain domain-name | level level-id | ma ma-name]
mac-address – MAC address of a remote maintenance point.
This address can be entered in either of the following formats: xx-
xx-xx-xx-xx-xx or xxxxxxxxxxxx
mpid – Maintenance end point identifier. (Range: 1-8191)
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Authorized maintenance level for this domain.
(Range: 0-7)
ma-name – Maintenance association name. (Range: 1-44
alphanumeric characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use the mpid keyword with this command to display information about a
specific maintenance point, or use the mac keyword to display information
about all maintenance points that have the specified MAC address.
E
XAMPLE
This example shows detailed information about the remote MEP designated
by MPID 2.
Console#show ethernet cfm maintenance-points remote detail mpid 2
MAC Address
Domain/Level
MA Name
Primary VLAN
MPID
Incoming Port
– 1579 –
C
: 00-0D-54-FC-A2-73
: voip / 3
: rd
: 1
: 2
: Eth 1/ 2
| CFM Commands
45
HAPTER
Defining CFM Structures