Table of Contents
Advertisement
| Link Aggregation Commands
C
32
HAPTER
Trunk Status Display Commands
Trunk Status Display Commands
show lacp
If the actor does not receive an LACPDU from its partner before the
◆
configured timeout expires, the partner port information will be deleted
from the LACP group.
When a dynamic port-channel member leaves a port-channel, the
◆
default timeout value will be restored on that port.
When a dynamic port-channel is torn down, the configured timeout
◆
value will be retained. When the dynamic port-channel is constructed
again, that timeout value will be used.
E
XAMPLE
Console(config)#interface port-channel 1
Console(config-if)#lacp timeout short
Console(config-if)#
This command displays LACP information.
S
YNTAX
show lacp [port-channel] {counters | internal | neighbors |
sys-id}
port-channel - Local identifier for a link aggregation group.
(Range: 1-8)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local
side.
neighbors - Configuration settings and operational state for
remote side.
sys-id - Summary of system priority and MAC address for all
channel groups.
D
S
EFAULT
ETTING
Port Channel: all
C
M
OMMAND
ODE
Privileged Exec
– 1224 –
Advertisement
Chapters
Table of Contents
