Show Ip Rip - Edge-Core ECS4660-28F Management Manual

Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing:
Default version control: send version by interface set,receive version by
interface set
Interface
VLAN1
Routing for Networks:
10.0.0.0/24
Routing Information Sources:
Gateway
10.0.0.2
The maximum number of RIP routes allowed: 7872
Distance: Default is 120
Console#
This command displays information about RIP routes and configuration

show ip rip

settings. Use this command without any keywords to display all RIP routes.
S
YNTAX
show ip rip [interface [vlan vlan-id]]
interface - Shows RIP configuration settings for all interfaces or for
a specified interface.
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ip rip
Codes: R - RIP, Rc - RIP connected, Rs - RIP static,
C - Connected, S - Static, O - OSPF
Network
Rc 192.168.0.0/24
Console#show ip rip interface vlan 1
Interface: vlan1
Routing Protocol: RIP
Receive RIPv1 and RIPv2 packets
Send RIPv1 Compatible
Passive interface: Disabled
Authentication mode: (None)
Authentication string: (None)
Split horizon: Enabled with Poisoned Reverse
IP interface address: 192.168.0.2/24
Console#
Send Recv
1-compatible 1 2
Distance Last Update
120 00:00:13
vlan-id - VLAN ID. (Range: 1-4094)
M
ODE
Next Hop
– 1749 –
| IP Routing Commands
C 51
HAPTER
Routing Information Protocol (RIP)
Bad Packets Bad Routes
0 0
Metric From Interface Time
1 VLAN1 01:57