No Switchport Voice Vlan - Edge-Core ECS4660-28F Management Manual

| VLAN Commands
C 40
HAPTER
Configuring Voice VLANs
switchport
voice vlan
E
XAMPLE
The following example adds a MAC OUI to the OUI Telephony list.
Console(config)#voice vlan mac-address 00-12-34-56-78-90 mask ff-ff-ff-00-00-
00 description A new phone
Console(config)#
This command specifies the Voice VLAN mode for ports. Use the no form to
disable the Voice VLAN feature on the port.
S
YNTAX
switchport voice vlan {manual | auto}

no switchport voice vlan

manual - The Voice VLAN feature is enabled on the port, but the
port must be manually added to the Voice VLAN.
auto - The port will be added as a tagged member to the Voice
VLAN when VoIP traffic is detected on the port.
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration
C U
OMMAND SAGE
When auto is selected, you must select the method to use for detecting
VoIP traffic, either OUI or 802.1ab (LLDP) using the
rule command. When OUI is selected, be sure to configure the MAC
address ranges in the Telephony OUI list using the
command.
E
XAMPLE
The following example sets port 1 to Voice VLAN auto mode.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan auto
Console(config-if)#
– 1382 –
switchport voice vlan
voice vlan mac-address