Edge-Core ECS4660-28F Management Manual page 1584

| CFM Commands
C 45
HAPTER
Continuity Check Operations
mep
archive-hold-time
clear ethernet cfm
maintenance-points
remote
This command sets the time that data from a missing MEP is retained in
the continuity check message (CCM) database before being purged. Use
the no form to restore the default setting.
S
YNTAX
mep archive-hold-time hold-time
hold-time – The time to retain data for a missing MEP.
(Range: 1-65535 minutes)
D S
EFAULT ETTING
100 minutes
C M
OMMAND ODE
CFM Domain Configuration
C U
OMMAND SAGE
A change to the hold time only applies to entries stored in the database
after this command is entered.
E
XAMPLE
This example sets the aging time for missing MEPs in the CCM database to
30 minutes.
Console(config)#ethernet cfm domain index 1 name voip level 3
Console(config-ether-cfm)#mep archive-hold-time 30
Console(config-ether-cfm)#
This command clears the contents of the continuity check database.
S
YNTAX
clear ethernet cfm maintenance-points remote
[domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Maintenance level. (Range: 0-7)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use this command without any keywords to clear all entries in the CCM
database. Use the domain keyword to clear the CCM database for a
specific domain, or the level keyword to clear it for a specific maintenance
level.
– 1584 –