Edge-Core ECS4660-28F Management Manual page 1565

ethernet cfm ais ma
E
XAMPLE
This example sets the maintenance level for sending AIS messages within
the specified MA.
Console(config)#ethernet cfm ais level 4 md voip ma rd
Console(config)#
This command enables the MEPs within the specified MA to send frames
with AIS information following detection of defect conditions. Use the no
form to disable this feature.
S
YNTAX
[no] ethernet cfm ais md domain-name ma ma-name
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-44
alphanumeric characters)
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Each MA name must be unique within the CFM domain.
◆
Frames with AIS information can be issued at the client's maintenance
◆
level by a MEP upon detecting defect conditions. For example, defect
conditions may include:
Signal failure conditions if continuity checks are enabled.
■
AIS condition or LCK condition if continuity checks are disabled.
■
A MEP continues to transmit periodic frames with AIS information until
◆
the defect condition is removed.
E
XAMPLE
This example enables the MEPs within the specified MA to send frames with
AIS information.
Console(config)#ethernet cfm ais md voip ma rd
Console(config)#
– 1565 –
| CFM Commands
C 45
HAPTER
Defining CFM Structures