Table 140: Port Mirroring Commands; Table 141: Mirror Port Commands - Edge-Core ECS4660-28F Management Manual

33
L P M
OCAL ORT IRRORING
port monitor
P M
ORT IRRORING
Data can be mirrored from a local port on the same switch or from a
remote port on another switch for analysis at the target port using
software monitoring tools or a hardware probe. This switch supports the
following mirroring modes.

Table 140: Port Mirroring Commands

Command Function
Local Port Mirroring Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
RSPAN Mirroring Mirrors data from remote switches over a dedicated VLAN
C
OMMANDS
This section describes how to mirror traffic from a source port to a target
port.

Table 141: Mirror Port Commands

Command Function
port monitor Configures a mirror session
show port monitor Shows the configuration for a mirror port
This command configures a mirror session. Use the no form to clear a
mirror session.
S
YNTAX
port monitor interface [rx | tx | both]
no port monitor interface
interface - ethernet unit/port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
rx - Mirror received packets.
tx - Mirror transmitted packets.
both - Mirror both received and transmitted packets.
– 1229 –
C
OMMANDS
Mode
IC
PE