Table of Contents
Advertisement
Table 215: show ethernet cfm configuration traps - display description
Field
CC MEP Up Trap
CC Mep Down Trap
CC Configure Trap
CC Loop Trap
Cross Check MEP
Unknown Trap
Cross Check MEP
Missing Trap
Cross Check MA Up
This example shows the CFM status for port 1.
This command displays the configured maintenance domains.
show ethernet cfm
md
S
D
None
C
Privileged Exec
E
This example shows all configured maintenance domains.
Description
Sends a trap if a remote MEP is discovered and added to the local
database, the port state of a previously discovered remote MEP
changes, or a CCM is received from a remote MEP which as an
expired entry in the archived database.
Sends a trap if this device loses connectivity with a remote MEP, or
connectivity has been restored to a remote MEP which has recovered
from an error condition.
Sends a trap if this device receives a CCM with the same MPID as its
own but with a different source MAC address, indicating that a CFM
configuration error exists.
Sends a trap if this device receives a CCM with the same source MAC
address and MPID as its own, indicating that a forwarding loop
exists.
A CCM is received from a MEP that has not been configured as a
DSAP (see the
a remote MEP (see the
through previous CCM messages.
This device failed to receive three consecutive CCMs from another
MEP in the same MA.
Generates a trap when all remote MEPs belonging to an MA come up.
Console#show ethernet cfm configuration interface ethernet 1/1
Ethernet 1/1 CFM Status:Enabled
Console#
YNTAX
show ethernet cfm md [level level]
level – Maintenance level. (Range: 0-7)
S
EFAULT
ETTING
M
OMMAND
ODE
XAMPLE
Console#show ethernet cfm md
MD Index
MD Name
--------
--------------------
1
rd
Console#
– 1575 –
C
HAPTER
Defining CFM Structures
ethernet cfm mep
command), manually configured as
mep crosscheck mpid
Level
MIP Creation
Archive Hold Time (m.)
-----
------------
----------------------
0
default
| CFM Commands
45
command), nor learned
100
Advertisement
Chapters
Table of Contents
