Table 201: Show Mvr6 Interface - Display Description - Edge-Core ECS4660-28F Management Manual

show mvr6 interface
E
XAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr6 domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IPv6 Addr.
-------------------- ------------------------- -------------------------
rd
Console#
This command shows MVR configuration settings for interfaces attached to
the MVR VLAN.
S
YNTAX
show mvr6 [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays configuration settings for all attached interfaces.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following displays information about the interfaces attached to the
MVR VLAN in domain 1:
Console#show mvr6 domain 1 interface
MVR6 Domain : 1
Port Type Status
-------- -------- ------------- ---------
Eth1/ 1 Source Active/Up
Eth1/ 2 Receiver Active/Up
Console#

Table 201: show mvr6 interface - display description

Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for source
ports is "ACTIVE" if MVR is globally enabled on the switch. MVR status
for receiver ports is "ACTIVE" only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
Immediate Shows if immediate leave is enabled or disabled.
Static Group Address Shows any static MVR group assigned to an interface, and the receiver
VLAN.
– 1509 –
| Multicast Filtering Commands
C 43
HAPTER
End IPv6 Addr.
FF00::1
Immediate Static Group Address
-------------------------
Disabled FF00::1(VLAN2)
MVR for IPv6
FF00::9