Table of Contents
Advertisement
Key Indicator Light Circuit Check (Key Indicator Light Doesn't Light when Ignition Knob Switch is
Pushed)
Wiring Diagram
8
[A]: Keyless start control module connector (viewed from harness side)
1. Keyless start control module
2. Combination meter
3. Key indicator light
Description
When the ignition knob switch is pushed, the key indicator light lights up in blue if you carry the remote controller
registered in the keyless start control module and it lights in red if you carry the remote controller which has not been
registered in the keyless start control module or if you carry no remote controller.
Troubleshooting
Step
1
Combination meter power and ground circuit check
1) Turn ignition switch to ON position.
Do warning light in combination meter other than key
indicator light light up?
2
Keyless start control module power and ground circuit
check
1) Check keyless start control module power and ground
circuit for condition referring to "Keyless Start Control
Module Power and Ground Circuit Check".
Is it in good condition?
3
Steering lock unit ignition knob switch check
1) Check ignition knob switch of steering lock unit for
operation referring to "Steering Lock Unit Inspection".
Is it in good condition?
1
12V
5V
WHT
G44-10
WHT/BLK
G44-11
YEL
G44-15
BLK G44-9
[A]
20
19
18
16
15
14
11
37
36
34 33 32
Action
G44-19
RED
G44-18
WHT
5V
5V
G44-20
ORN
G44-29
BRN/YEL
G44-30
BLK/YEL
G44-14
BLU/RED
G44-34
BRN/RED
G44
10
9
8
7
6
5
4
3
2
30 29
24 23
4. Steering lock unit
5. Steering lock solenoid
6. Key reminder switch
7. Ignition knob switch
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4.
Keyless Start System:
2
G28-10
RED
WHT
G28-8
3
G28-14
4
5V
G22-6
5V
G22-3
G22-7
5
G22-8
6
G22-4
G22-1
G22-5
G22-2
7
9
1
8. Junction block
9. Ignition knob switch signal circuit
No
Check main fuse, circuit
fuse, combination meter
power and ground
circuit.
Repair circuit.
Replace steering lock
unit.
10E-23
S6JB0AA504015
WHT
WHT
WHT
WHT
I7JB01A50002-01
Advertisement
Chapters
Table of Contents
