Cadillac 60 Series 1963 Shop Manual page 553

16-84
BODY
Front Attaching Screws
Rear Attaching Screw
VIEW-A
VIEW-B
Fig. 16-94 Ho Id-Down Cable Attaching Screws
7. Detach folding top compartment bag from
rear seat back panel, thus exposing rear quarter
and rear trim stick attaching bolts. Forward end
of top compartment bag may be tied or wired to
center roof bow to provide ready access to
attaching bolts.
8. At each rear quarter area remove attaching
bolts securing rear quarter trim stick assembly
to rear quarter inner panel, Fig. 16-95.
10. To establish relationship of right and left
inner vertical edge of old top material to back
curtain assembly at rear trim stick location,
mark back curtain vinyl at both locations with a
grease pencil, Fig. 16-96. Reference marks
should be transferred to new back curtain when
step 7 of installation procedure is performed.
NOTE: Reference marks must be made be-
low upper edge of rear trim stick.
9. Remove rear trim stick attaching bolts; then
lift trim assembly with attached quarter and rear
trim sticks on top of rear compartment front
panel.
11. To establish relationship of old top material
to its position on rear trim sticks, cut selvage
end of top material off flush with lower edge of
trim sticks.