Cadillac 60 Series 1963 Shop Manual page 37

4-14
CHASSIS SUSPENSION
3/8"
J K
- 9/32"
^ ^ 6-1/2"
Fig. 4-17 Grease Retainer Remover Tool
2. Pack bearing cages with high melting point
grade 2 grease. Use a commercial bearing packer
or pack bearings by hand. Force grease in at
large end of cage until it protrudes from the small
end.
3. Install outer bearing cup, using Front Hub
Outer Bearing Cup Installer, J-8457, and Handle,
J-8092. Use arbor press to install bearing cup in
hub, Fig. 4-18, supporting front hub and drum
assembly on flange area of hub.
4. Install inner bearing cup, using Front Hub
Inner Bearing Cup Installer, J-8458, and Handle,
J-8092. Use arbor press to install bearing cup in
hub, Fig. 4-19.
Inner Bearing
Universal
Handle
J-8092
Fig. 4-19 Installing Inner Bearing Cup
5. Place inner bearing cone and roller assembly
in inner bearing cup.
6. Install new grease retainer, using Front
Wheel Hub Grease Retainer Installer, J-8456, and
Handle, J-8092. Use arbor press to install grease
retainer in hub, Fig. 4-20.
Outer Bearing
Cup Installer
J-8457
Universal
Handle
J-8092
Grease Retainer
Installer J-8456
Fig. 4-18 Installing Outer Bearing Cup
Fig. 4-20 Installing Grease Retainer