HYDRA-MATIC TRANSMISSION
6-53
Fig. 6-96
Installing Bushing in Extension Housing
4. Tap Chisel with hammer until split in bush-
ing opens up, then remove bushing.
5. Repeat steps 3 and 4 for lower bushing.
6. Place new bushing on long end of Driver
Head, J-8400-25, and install bushing in extension
housing using Handle, J-8092.
X .
-
J-8400-22
Fig. 6-97
Staking Bushing in Extension Housing
7. Place new bushing on short end of Driver
Head, J-8400-25, and install bushing in extension
housing using Handle, J-8092.
8. Stake both bushings securely using Staking
Tool, J-8400-22. Be certain that staker points
enter oil groove of bushing to avoid raising burrs.