Cadillac 60 Series 1963 Shop Manual page 503

16-34
BODY
2. Remove bolts securing door inner panel cam
assembly and disengage cam from regulator bal-
ance arm and remove cam from door, Fig. 16-34.
3. To install, reverse removal procedure.
Prior to installation, lubricate entire length of
cam with lubricant.
b. Adjustments
1. To correct a condition where the glass is
cocked in glass run channels, loosen inner panel
cam attaching screws, adjust either end of cam
up or down as required, and tighten screws.
36. Rear Door Assembly and Hinges
Rear door hinges are attached to the center
pillar with two butt-type hinges. The hinges are
secured to the center pillar and door hinge pillar
by screws and anchor plates. The lower hinge
Fig. 16-37 Rear Dooi* Assembly - 39 Styles
A.
B.
c.
D.
E.
F.
G.
H.
Rear Door
Rear Door
Plate
Rear Door
Cam
Rear Door
Plate
Rear Door
Rear Door
Rear Door
Rear Door
Window
Window
Window
Window
Outside
Lock to
Assembly
Front Female Wedge
Lower Sash Channel
Rear Female Wedge
Handle Assembly
Locking Lever Rod
Lock Assembly
Lock Remote Control to Lock
Rod Assembly
I.
J.
K,
L.
M.
N.
0 .
Rear Door Window
Assembly
Rear Guide Cam
Rear Door Lock Remote Control Assembly
Rear Door Window
Assembly
Rear Door Window
Motor Assembly
Rear Door Window
Manual
Guide Front Cam
Electric Regulator and
Regulator Assembly -
Rear Door Inside Locking Rod
Rear Door Window
Assembly
Inner Panel Cam