Bico Interconnection Procedure In Starter - Siemens Sinamics S110 Function Manual

General information for commissioning

1.2 BICO interconnection procedure in STARTER

Figure 1-1 The different areas of the STARTER user interface
1.2 BICO interconnection procedure in STARTER
Introduction
Parameterization can be carried out via the following means:
● Expert list
● Graphical screen interface
The steps described below explain the BICO interconnection procedure in STARTER.
Expert list
When carrying out BICO interconnection via the expert list, proceed as follows:
You want to interconnect parameter p0840 of the control word with r parameter r2090[0], for
example.
22
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions