Chrysler Conquest 1988 Service Manual page 189

BRAKES
- Brake Master Cvlinder
5-39
14KOlE
14KOl!
(2) Measure master cylinder's brake booster mounting
surface to end face dimension (C).
(3) Measure brake booster's master cylinder mounting
surface to push rod end dimension (D).
(4) From values obtained in (I), (2) and (31, determine brake
booster push rod to primary piston clearance (A).
Standard value: 0.7 - 1.1 mm (.028 - .043 in.)
[A=B-C-D]
(5) If the clearance is not within the standard value range,
adjust by changing the push rod length by turning ,the
screw of the push rod.
Caution
Insufficient clearance may cause excessive brake
drag.