Chrysler Conquest 1988 Service Manual page 143

BODY - Automatic Seat Belts
23-115
Ignition switch ON
I
LOCK or ACC )
I
Spool release
lever switch
Buzzer
"Fasten seat belt"
indicator light
Spool release
indicator light
To: For approximately 0.7 sec.
T,: For approximately 6 sec.
T2: For approximately 1.5 sec.
19110323
~;~y~hminder
Ignition (ON) I----
switch (LOCK or ACC)
Iriver's side
door lock switch
close side)
,kznlll-
3uzzer
(Fin
16Y365:
Automatic seat belt control
unit connector terminals
16Y3667
4. KEY REMINDER
When the door lock switch on the driver's side door is
turned LOCK or ACC from ON position (close + open), the
buzzer will sound without interruption in case the steering
lock switch is ON (key inserted in key cylinder) and the
ignition switch is in LOCK or ACC position.
AUTOMATIC SEAT BELT CONTROL UNIT INPUT/
OUTPUT SIGNALS
1. POWER SUPPLY AND GROUND CIRCUIT
Name
Terminal No. Voltage level
Battery (+B)
I
21
I
H
I
Automatic seat belt
motor (+B)
11
H
GROUND (GND) 16 L
NOTE
H
and
L in the voltage level column indicate the terminal voltage of
each signal.
H : Battery voltage
L:
Ground voltage (0.8V or less)