Chrysler Conquest 1988 Service Manual page 149

BODY
- Automatic Seat Belts
23-121
SERVICE POINTS OF REMOVAL
7. REMOVAL OF OUTER CASING (B)
Raise the claw of the outer casing (B) and disconnect the
outer casing (A) from the tape guide. Then, with the tape
pulled all the way out, remove the outer casing (B).
16. REMOVAL OF REAR CONSOLE BOX
Remove the inner box cover and remove the rear console
box attaching screws shown. Then, remove the rear
console box.
18. REMOVAL OF DOOR SASH TRIM
Refer to P.23-64.
20. REMOVAL OF FLOOR CONSOLE
Refer to P.23-93.
INSPECTION
RAIL GUIDE
(1) Check the tape moves smoothly and does not catch when
pulled and pushed.
If not, check the guide rail for foreign particles.
(2) Check the tape for wear or damage.
Caution
Do not wipe off the grease and take care not to soil the
tape.