Chrysler Conquest 1988 Service Manual page 150

23-722
BODY - Automatic Seat Belts
19Y697
Knob
19Y69!
(1) Remove the motor.
(2) Connect the motor termmals directly to the battery and
check that the motor operates smoothly. Next, reverse the
polarity and check that the motor operatessmoothly in the
reverse direction.
(3) Check the glear<or'wearFor
damage.
RELEASE SWITCH AND FASTEN SWITCH
(1) Remove the release switch and fasten switch. _
(2) Check the continuity between the terminals.
Release the switch knob
Push the switch knob
NOTE
O-0 indicates that there is continuity between the terminals.
SPOOL RELEASE LEVER SWITCH
(1) Disconnect the spool release lever switch connector.
(2) Check the contrnuity between the terminals.
Spool release lever does not opei%te
Spool release lever lift up
0 0
NOTE
C.+LJ lndlcates that there IS continuity between the terminals.