Chrysler Conquest 1988 Service Manual page 136

23408
BODY - Automatic Seat Belts
-
Gear B
Gear C
Gear C
Pawl e
Cam
Gear C
(2) ALR
1. Pull out the webbing.
The number of webbing rotor revolutions is reduced~~by
gears A, B and C to-rotate the cam.
2. When the webbing has been extended almosttully. the ~_
cam strikes paw1 B to engage It with V-gear and
locks
the webbing.
3. Then, retract the webbing. When it has been retracted
almost fully, the cams returns paw1 B to its original
position, bringing the system into ELF? state.