Configuring Bfd For Pim In Vrf Mode; Configuring Bfd For Pim In Interface Mode - Cisco Nexus 7000 Series Configuration Manual

Configuring PIM and PIM6

Configuring BFD for PIM in VRF Mode

Note You can configure BFD for PIM by either VRF or by interface.
Before you begin
Ensure that you have installed the Enterprise Services license, enabled PIM or PIM6, and enabled BFD.
Procedure
Step 1
Step 2
Step 3

Configuring BFD for PIM in Interface Mode

Before you begin
Ensure that you have installed the Enterprise Services license, enabled PIM or PIM6, and enabled BFD.
Procedure
Step 1
Step 2
Command or Action
config t
Example:
switch# config t
switch(config)#
vrf context vrf-name
Example:
switch# vrf convrf-name
text test
switch(config-vrf)#
ip pim bfd
Example:
switch(config-vrf)# ip pim bfd
Command or Action
config t
Example:
switch(config)# interface ethernet 7/40
switch(config-if)#
interface interface-type
Example:
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Configuring BFD for PIM in VRF Mode
Purpose
Enters global configuration mode.
Enters VRF configuration mode.
Enables BFD on the specified VRFs.
You can also enter the ip pim bfd
Note
command in configuration mode,
which enables BFD on VRF.
Enters VRF configuration mode.
Purpose
Enters global configuration mode.
Enters interface configuration mode.
115