Side-By-Side 19" Rack Mounting - ABB Relion 650 Series Technical Manual

Section 16
IED hardware
16.4.4
16.4.4.1
16.4.4.2
688
The required torque for the screws is 3.5 Nm.
PosNo Description
1a, 1b Mounting angles, can be mounted
either to the left or the right side of
the case
2 Screw
3 Washer

Side-by-side 19" rack mounting

Overview
IED case size 1/2 x 19" and RHGS cases can be mounted side-by-side up to a
maximum size of 19". For side-by-side rack mounting, the side-by-side mounting
kit together with the 19" rack panel mounting kit must be used. The mounting kit
has to be ordered separately.
Use only the screws included in the mounting kit when mounting
the plates and the angles on the IED. Screws with wrong dimension
may damage the PCBs inside the IED.
Mounting procedure for side-by-side rack mounting
3
4
IEC04000456 V3 EN-US
Figure 316: Side-by-side rack mounting details.
1
2
3
IEC040004563enOriginal.vsdx
1MRK 511 424-UEN B
Quantity Type
2 -
8 M4x6
8 M4x6
Bay control REC650 2.2 IEC
Technical manual
IP10323-1 v1
M11974-3 v3
M11955-2 v4