ABB Relion 650 Series Technical Manual page 80
Bay control
Hide thumbs
Also See for Relion 650 Series:
- Technical manual (644 pages) ,
- Applications manual (382 pages) ,
- Commissioning manual (182 pages)
Table of Contents
Advertisement
Section 5
Local Human-Machine-Interface LHMI
74
When the automatic reset of the LEDs has been performed, still
persisting indications will be indicated with a steady light.
Operating sequence
The sequences can be of type Follow or Latched. For the Follow type, the LED
follows the input signal completely. For the Latched type, each LED latches to the
corresponding input signal until it is reset.
The figures below show the function of available sequences selectable for each
LED separately. The following 6 sequences are available:
•
Sequence 1: Follow-S
•
Sequence 2: Follow-F
•
Sequence 3: LatchedAck-F-S
•
Sequence 4: LatchedAck-S-F
•
Sequence 5: LatchedColl-S
•
Sequence 6: LatchedReset-S
For sequence 1 and 2, which are of the Follow type, the acknowledgment (Ack ) /
reset function is not applicable because the indication shown by the LED follows
its input signal. Sequence 3 and 4, which are of the Latched type with
acknowledgement, are only working in collecting (Coll) mode. Sequence 5 is
working according to Latched type and collecting mode while Sequence 6 is
working according to Latched type and re-starting (Reset) mode. The letters S and
F in the sequence names have the meaning S = Steady and F = Flash.
At the activation of the input signal to any LED, the indication on the
corresponding LED obtains a color that corresponds to the activated input, and
operates according to the selected sequence diagrams shown below.
In the sequence diagrams the different statuses of the LEDs are shown using the
following symbols:
= No indication
= Green
G
IEC09000311 V1 EN-US
Figure 17:
Symbols used in the sequence diagrams
Sequence 1 (Follow-S)
This sequence follows the corresponding input signals all the time with a steady
light. It does not react on acknowledgment or reset. Every LED is independent of
the other LEDs in its operation.
= Steady light
= Yellow
Y
IEC09000311.vsd
1MRK 511 424-UEN B
GUID-DFCA880B-308C-4334-94DF-97C7765E8C13 v5
= Flash
= Red
R
SEMOD56072-39 v4
Bay control REC650 2.2 IEC
Technical manual
Advertisement
Table of Contents
