Front Panel User Interface; Mounting Methods - ABB RELION 630 Series Product Manual

Generator Protection and Control
REG630
Product version: 1.3

19. Front panel user interface

The 630 series protection relays can be ordered with a
detached front-panel user interface (HMI). An integrated HMI is
available for 4U high housing. The local HMI includes a large
graphical monochrome LCD with a resolution of 320 x 240
pixels (width x height). The amount of characters and rows
fitting the view depends on the character size as the characters'
width and height may vary.
In addition, the local HMI includes dedicated open/close
operating buttons and five programmable function buttons with
GUID-5CFD3446-A92F-4A5F-B60D-90025DCFDC61 V2 EN
Figure 6. Local user interface

20. Mounting methods

By means of appropriate mounting accessories the standard
relay case for the 630 series protection relays can be flush
mounted, semi-flush mounted or wall mounted. Detachable
HMI is intended for optimized mounting in medium voltage
metal-clad switchgear, thus reducing wiring between the low-
voltage compartment and the panel door. Further, the
protection relays can be mounted in any standard 19"
instrument cabinet by means of 19" rack mounting accessories.
For the routine testing purposes, the relay cases can be
installed with RTXP test switches (RTXP8, RTXP18 or RTXP24)
which can be mounted side by side with the relay case in a 19"
rack.
Mounting methods:
• Flush mounting
• Semi-flush mounting
• Overhead/ceiling mounting
ABB
LED indicators. The 15 programmable alarm LEDs can indicate
a total of 45 alarms. The local HMI offers full front-panel user-
interface functionality with menu navigation, menu views and
operational data. In addition, the local HMI can, using PCM600,
be configured to show a single-line diagram (SLD). The SLD
view displays the status of the primary apparatus such as circuit
breakers and disconnectors, selected measurement values and
busbar arrangements.
• 19" rack mounting
• Wall mounting
• Mounting with a RTXP8, RTXP18 or RTXP24 test switch to a
19"rack
• Door mounting of the local HMI, relay case mounted in the
low-voltage compartment of the switchgear
To ensure grounding of the RTD channels, a separate cable
shield rail is included in the protection relay delivery when the
optional RTD/mA module is ordered.
For further information regarding different mounting options see
the installation manual.
1MRS757583 C
55