Technical Data - ABB Relion 650 Series Technical Manual

1MRK 511 424-UEN B
16.2.2.3
16.2.3
16.2.3.1
16.2.3.2
Bay control REC650 2.2 IEC
Technical manual

Technical data

Table 527: SFP - Optical ethernet port
Quantity
Number of channels
Standard
Type of fiber
Wave length
Optical connector
Communication speed
Table 528: SFP - Galvanic RJ45
Quantity
Number of channels
Standard
Type of cable
Connector
Communication Speed
Table 529: NUM: Communication ports
NUM
Ethernet connection type
Power supply module (PSM)
Introduction
The power supply module is used to provide the correct internal voltages and full
isolation between the IED and the battery system. An internal fail alarm output is
available.
Alternative connectors of Ring lug or Compression type can be ordered.
Design
There are two types of the power supply module. They are designed for different
DC input voltage ranges see table 530. The power supply module contains a built-
IED hardware
Rated value
4 single or 2 redundant can be used for single or
redundant communication using any protocol
IEEE 802.3u 100BASE-FX
62.5/125 mm multimode fiber
1310 nm, Class 1 laser safety
Type LC
Fast Ethernet 100 Mbit/s
Rated value
Up to 6 single or 3 redundant or a combination of
single and redundant links for communication
using any protocol
IEEE 802.3u 100BASE-TX
Cat5e FTP
Type RJ45
Fast Ethernet 100 Mbit/s
GUID-96676D5D-0835-44DA-BC22-058FD18BDF34 v3
4 Ethernet ports
1 Basic, 3 Optional
SFP Optical LC or Galvanic RJ45
Section 16
SEMOD55319-1 v1
SEMOD55310-2 v13
IP15594-1 v1
M11595-3 v6
IP14278-1 v1
M6377-3 v2
649