Technical Data - ABB Relion 650 Series Technical Manual

Section 16
IED hardware
16.2.5.3
16.2.6
16.2.6.1
652

Technical data

Table 531: TRM - Energizing quantities, rated values and limits for protection transformer
Description
Frequency
Rated frequency f
r
Operating range
Current inputs
Rated current I
r
Operating range
Thermal withstand
Dynamic withstand
Burden
*) max. 350 A for 1 s when COMBITEST test switch is included.
Voltage inputs **)
Rated voltage U
r
Operating range
Thermal withstand
Burden
**) all values for individual voltage inputs
Note! All current and voltage data are specified as RMS values at rated frequency
Binary input module (BIM)
Introduction
The binary input module has 16 optically isolated inputs and is available in two
versions, one standard and one with enhanced pulse counting capabilities on the
inputs to be used with the pulse counter function. The binary inputs are freely
programmable and can be used for the input of logical signals to any of the
functions. They can also be included in the disturbance recording and event-
recording functions. This enables extensive monitoring and evaluation of operation
of the IED and for all associated electrical circuits.
Value
50/60 Hz
f ± 10%
r
1 or 5 A
(0-100) x I
r
100 × I for 1 s *)
r
30 × I for 10 s
r
10 × I for 1 min
r
4 × I continuously
r
250 × I one half wave
r
< 20 mVA at I = 1 A
r
< 150 mVA at I = 5 A
r
110 or 220 V
0 - 340 V
450 V for 10 s
420 V continuously
< 20 mVA at 110 V
< 80 mVA at 220 V
Bay control REC650 2.2 IEC
1MRK 511 424-UEN B
SEMOD55412-1 v1
M16988-1 v11
IP14535-1 v1
M1769-3 v4
Technical manual