Product Information Prodinf - ABB Relion 650 Series Technical Manual

Section 15
Basic IED functions
15.5
15.5.1
15.5.2
15.5.3
632

Product information PRODINF

Functionality
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers:
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers.
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
Figure 282: IED summary
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
Settings
The function does not have any parameters available in the local HMI or PCM600.
Factory defined settings
The factory defined settings are very useful for identifying a specific version and
very helpful in the case of maintenance, repair, interchanging IEDs between
different Substation Automation Systems and upgrading. The factory made settings
can not be changed by the customer. They can only be viewed. The settings are
found in the local HMI under Main menu/Diagnostics/IED status/Product
identifiers
The following identifiers are available:
• IEDProdType
• Describes the type of the IED. Example: REL650
• ProductDef
• Describes the release number from the production. Example: 2.1.0
• FirmwareVer
1MRK 511 424-UEN B
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
GUID-168CD792-8811-43B5-8760-74ED82DE17F7 v5
M11789-39 v11
Bay control REC650 2.2 IEC
Technical manual