ABB Relion 650 Series Technical Manual page 227

1MRK 511 424-UEN B
Bay control REC650 2.2 IEC
Technical manual
Name Type
XPOSL1 GROUP
SIGNAL
XPOSL2 GROUP
SIGNAL
XPOSL3 GROUP
SIGNAL
Table 103: SCSWI Output signals
Name Type
EXE_OP BOOLEAN
EXE_CL BOOLEAN
SEL_OP BOOLEAN
SEL_CL BOOLEAN
SELECTED BOOLEAN
RES_RQ BOOLEAN
START_SY BOOLEAN
CANC_SY BOOLEAN
POSITION INTEGER
OPENPOS BOOLEAN
CLOSEPOS BOOLEAN
POLEDISC BOOLEAN
CMD_BLK BOOLEAN
L_CAUSE INTEGER
POS_INTR BOOLEAN
XEXINF GROUP SIGNAL
AU_OPEN and AU_CLOSE are used to issue automated
commands as e.g. for load shedding for opening respectively
closing to the SCSWI function. They work without regard to how
the operator place selector, PSTO, is set. In order to have effect on
the outputs EXE_OP and EXE_CL, the corresponding enable input,
EN_OPEN respectively EN_CLOSE must be set, and that no
interlocking is active.
L_SEL, L_OPEN and L_CLOSE are used for local command
sequence connected to binary inputs. In order to have effect, the
operator place selector, PSTO, must be set to local or to remote
Default Description
- Group signal from XCBR/XSWI per phase
- Group signal from XCBR/XSWI per phase
- Group signal from XCBR/XSWI per phase
Description
Execute command for open direction
Execute command for close direction
Selected for open command
Selected for close command
Select conditions are fulfilled
Request signal to the reservation function
Starts the external synchronizing function
Cancels the external synchronizing function,
started through START_SY
Position indication
Open position indication
Closed position indication
The positions for poles L1-L3 are not equal after
a set time
Commands are blocked
Latest value of the error indication during
command
Stopped in intermediate position
Execution information to XCBR, XSWI &
XLNPROXY
Section 8
Control
PID-6798-OUTPUTSIGNALS v4
GUID-7DABB496-EABE-48A4-8078-7ED5D6D4FE14 v2
221