Type Tests According To Standard - ABB Relion 650 Series Technical Manual

Section 16
IED hardware
16.5.5
694

Type tests according to standard

Table 567: Electromagnetic compatibility
Test Type test values
1 MHz burst 2.5 kV
disturbance
100 kHz slow damped 2.5 kV
oscillatory wave
immunity test
Ring wave immunity 2-4 kV
test, 100 kHz
Surge withstand 2.5 kV, oscillatory
capability test 4.0 kV, fast transient
Electrostatic discharge 15 kV air discharge
Direct application 8 kV contact discharge
Indirect application 8 kV contact discharge
Electrostatic discharge 15 kV air discharge
Direct application 8 kV contact discharge
Indirect application 8 kV contact discharge
Fast transient 4 kV
disturbance 2 kV, SFP galvanic RJ45
2 kV, MIM mA-inputs
Surge immunity test
2-4 kV, 1.2/50ms high energy
1-2 kV, BOM and IRF outputs
Power frequency 150-300 V, 50 Hz
immunity test
Conducted common 15 Hz-150 kHz
mode immunity test
Power frequency 1000 A/m, 3 s
magnetic field test 100 A/m, cont.
Pulse magnetic field 1000 A/m
immunity test
Damped oscillatory 100 A/m
magnetic field test
Radiated 20 V/m, 80-1000 MHz
electromagnetic field
disturbance 1.4-2.7 GHz
Radiated 20 V/m
electromagnetic field 80-1000 MHz
disturbance 10 V/m, 5.1-6.0 GHz
Conducted 10 V, 0.15-80 MHz
electromagnetic field
disturbance
Radiated emission 30-5000 MHz
Radiated emission 30-5000 MHz
Conducted emission 0.15-30 MHz
1MRK 511 424-UEN B
Reference standards
IEC 60255-26
IEC 61000-4-18, Class III
IEC 61000-4-12, Class IV
IEEE/ANSI C37.90.1
IEC 60255-26
IEC 61000-4-2, Class IV
IEEE/ANSI C37.90.1
IEC 60255-26, Zone A
IEC 60255-26, Zone B
IEC 60255-26, Zone A
IEC 60255-26, Zone B
IEC 60255-26, Zone A
IEC 61000-4-16, Class IV
IEC 61000-4-8, Class V
IEC 61000–4–9, Class V
IEC 61000-4-10, Class V
IEC 60255-26
IEEE/ANSI C37.90.2
EN 50121-5
IEC 60255-26
IEC 60255-26
IEEE/ANSI C63.4, FCC
IEC 60255-26
Bay control REC650 2.2 IEC
Technical manual
IP16288-1 v1
M16706-1 v13