Settings - ABB Relion 650 Series Technical Manual

Section 13
Station communication
13.4.4
Table 414: MU1_HW Non group settings (basic)
Name
CTStarPoint1
CTStarPoint2
CTStarPoint3
CTStarPoint4
13.4.5
516

Settings

Values (Range) Unit
FromObject -
ToObject
FromObject -
ToObject
FromObject -
ToObject
FromObject -
ToObject
Monitored data
Table 415: MU1_HW Monitored data
Name
MUDATA
SYNCH
SMPLLOST
MUSYNCH
TESTMODE
SIMMODE
BadReference
Derived
Failure
Inaccurate
Inconsistent
Table continues on next page
Step Default
- ToObject
- ToObject
- ToObject
- ToObject
Type Values (Range)
BOOLEAN 0=Ok
1=Error
BOOLEAN 0=Ok
1=Error
BOOLEAN 1=Yes
0=No
BOOLEAN 0=Ok
1=Error
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
BOOLEAN 1=Yes
0=No
1MRK 511 424-UEN B
Description
ToObject= towards protected object,
FromObject= the opposite
ToObject= towards protected object,
FromObject= the opposite
ToObject= towards protected object,
FromObject= the opposite
ToObject= towards protected object,
FromObject= the opposite
PID-6850-MONITOREDDATA v3
Unit Description
- Fatal error, data not
received, transmission
errors, time-sync issues
or inconsistent sample
rate
- High when IED clock is
not within configured
accuracy or time domain
- Fatal error or recovery
state after fatal error.
High if any subscribed
channel has bad quality
or TEST while IED not in
test mode.
- MU not synced or MU
clock not synced to
same clock as IED
- Quality of one or more
subscribed analogue
channels is TEST
- MU delivers simulated
data accepted by IED
- BadReference indication
output for I1
- Derived indication output
for I1
- Failure indication output
for I1
- Inaccurate indication
output for I1
- Inconsistent indication
output for I1
Bay control REC650 2.2 IEC
Technical manual
SEMOD166625-1 v2
PID-6850-SETTINGS v3