Settings - ABB Relion 650 Series Technical Manual

Section 13
Station communication
13.7.12.5
Table 452: I103USRCMD Non group settings (basic)
Name
FunctionType
PulseMode
PulseLength
InfNo_1
InfNo_2
InfNo_3
InfNo_4
InfNo_5
InfNo_6
InfNo_7
InfNo_8
13.7.13
13.7.13.1
13.7.13.2
572

Settings

Values (Range) Unit
1 - 255 -
Steady -
Pulsed
0.200 - 60.000 s
1 - 255 -
1 - 255 -
1 - 255 -
1 - 255 -
1 - 255 -
1 - 255 -
1 - 255 -
1 - 255 -
Function commands generic for IEC 60870-5-103
I103GENCMD
Functionality
I103GENCMD is used for transmitting generic commands over IEC 60870-5-103.
The function has two outputs signals CMD_OFF and CMD_ON that can be used to
implement double-point command schemes.
The I103GENCMD component can be configured as either 2 pulsed ON/OFF or 2
steady ON/OFF outputs. The ON output is pulsed with a command with value 2,
while the OFF output is pulsed with a command value 1. If in steady mode is ON
asserted and OFF deasserted with command 2 and vice versa with command 1.
Steady mode is selected by setting PulseLength=0. The I103GENCMD is retained,
and a command in steady mode will be reissued on restart.
Identification
Function description
Function commands generic for IEC
60870-5-103
Step Default
1 1
- Pulsed
0.001 0.400
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
Function block
name
I103GENCMD
1MRK 511 424-UEN B
Description
Function type (1-255)
Pulse mode
Pulse length
Information number for output 1 (1-255)
Information number for output 2 (1-255)
Information number for output 3 (1-255)
Information number for output 4 (1-255)
Information number for output 5 (1-255)
Information number for output 6 (1-255)
Information number for output 7 (1-255)
Information number for output 8 (1-255)
GUID-729E9AFD-0468-4BBD-B54A-A6CDCC68A9B2 v3
GUID-1933A30C-5214-4116-8CD3-91BD975FACED v1
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Bay control REC650 2.2 IEC
Technical manual
PID-3790-SETTINGS v5