Settings - ABB Relion 650 Series Technical Manual

Section 10
Monitoring
10.1.5
Table 287: CVMMXN Non group settings (basic)
Name
SLowLim
SLowLowLim
SMin
SMax
SRepTyp
Table continues on next page
358
Table 286: VNMMXU Output signals
Name
UL1
UL1RANG
UL1ANGL
UL2
UL2RANG
UL2ANGL
UL3
UL3RANG
UL3ANGL

Settings

The available setting parameters of the measurement function (MMXU, MSQI) are
depending on the actual hardware (TRM) and the logic configuration made in
PCM600.
These six functions are not handled as a group, so parameter settings are only
available in the first setting group.
The following terms are used in the Unit and Description columns:
• UBase (UB): Base voltage in primary kV. This voltage is used as reference for
voltage setting. It can be suitable to set this parameter to the rated primary
voltage supervised object.
• IBase (IB): Base current in primary A. This current is used as reference for
current setting. It can be suitable to set this parameter to the rated primary
current of the supervised object.
• SBase (SB): Base setting for power values in MVA.
Values (Range) Unit
0.0 - 2000.0 %SB
0.0 - 2000.0 %SB
0.0 - 2000.0 %SB
0.0 - 2000.0 %SB
Cyclic -
Deadband
Int deadband
Db & Cyclic 5s
Db & Cyclic 30s
Db & Cyclic 1min
Type Description
REAL UL1 Amplitude, magnitude of reported value
INTEGER UL1 Amplitude range
REAL UL1 Angle, magnitude of reported value
REAL UL2 Amplitude, magnitude of reported value
INTEGER UL2 Amplitude range
REAL UL2 Angle, magnitude of reported value
REAL UL3 Amplitude, magnitude of reported value
INTEGER UL3 Amplitude range
REAL UL3 Angle, magnitude of reported value
Step Default
0.1 80.0
0.1 60.0
0.1 50.0
0.1 200.0
- Cyclic
1MRK 511 424-UEN B
PID-6737-OUTPUTSIGNALS v2
Description
Low limit in % of SBase
Low Low limit in % of SBase
Minimum value in % of SBase
Maximum value in % of SBase
Reporting type
Bay control REC650 2.2 IEC
Technical manual
SEMOD130322-4 v7
PID-6713-SETTINGS v3