1MRK 511 424-UEN B
16.4.3
16.4.3.1
16.4.3.2
Bay control REC650 2.2 IEC
Technical manual
19" panel rack mounting
Overview
The IED can be mounted in a standard 19" cubicle rack by using a mounting kit
consisting of two mounting angles and their fastening screws.
The mounting angles are reversible which enables mounting of the IED either to
the left or the right side of the cubicle.
A separately ordered rack mounting kit for side-by-side mounted
IEDs or IEDs together with RHGS cases should be selected so that
the total size equals 19".
Use only the screws included in the mounting kit when mounting
the plates and the angles on the IED. Screws with wrong dimension
may damage the PCBs inside the IED.
Mounting procedure for 19" panel rack mounting
2
1a
IEC04000452 V3 EN-US
Figure 315:
19" panel rack mounting details
1b
3
IEC04000452-3-en.vsd
Section 16
IED hardware
IP10313-1 v1
SEMOD127656-5 v4
M11948-2 v7
687