ABB Relion 650 Series Technical Manual page 584

Section 13
Station communication
578
Function commands in control direction, user-defined, I103USRCMD
Function command blocks in control direction with user-defined output signals.
Number of instances: 4
Function type for each function block instance in private range is selected with
parameter FunctionType.
Information number must be selected for each output signal. Default values are 1 -
8.
Table 462: I103USRCMD supported indications
Description
1)
INF
1 Output signal 01
2 Output signal 02
3 Output signal 03
4 Output signal 04
5 Output signal 05
6 Output signal 06
7 Output signal 07
8 Output signal 08
1) User defined information number
Status
Terminal status indications in monitor direction, I103IED
Indication block for status in monitor direction with defined IED functions.
Number of instances: 1
Function type is selected with parameter FunctionType.
Information number is defined for each input signals.
Table 463: I103IED supported functions
INF Description
19 LED reset
21 TestMode
22 Local Parameter setting
23 Setting group 1 active
24 Setting group 2 active
25 Setting group 3 active
26 Setting group 4 active
Function status indications in monitor direction, user-defined, I103USRDEF
Function indication block in monitor direction with user-defined input signals.
1MRK 511 424-UEN B
M11874-72 v6
M11874-107 v1
M11874-109 v7
M11874-137 v7
Bay control REC650 2.2 IEC
Technical manual