Settings - ABB Relion 650 Series Technical Manual

1MRK 511 424-UEN B
9.7.7.3
Table 190: RSMEMORY Group settings (basic)
Name Values (Range)
Memory
9.7.7.4
9.7.8
9.7.8.1
Bay control REC650 2.2 IEC
Technical manual

Settings

Unit
Off -
On
Technical data
Table 191: Number of RSMEMORY instances
Logic block
RSMEMORY
Set-reset with memory function block SRMEMORY
The Set-reset with memory function block (SRMEMORY) is a flip-flop with
memory that can set or reset an output from two inputs respectively. Each
SRMEMORY function block has two outputs, where one is inverted. The memory
setting controls if, after a power interruption, the flip-flop resets or returns to the
state it had before the power interruption. The input SET has priority.
Table 192: Truth table for SRMEMORY function block
SET RESET
0 0
0 1
1 0
1 1
Function block
SRMEMORY
SET
RESET NOUT
IEC04000408_2_en.vsd
IEC04000408 V2 EN-US
Figure 145: SRMEMORY function block
Step Default
- On
Quantity with cycle time
3 ms 8 ms
10
OUT NOUT
Last Inverted
value last value
0 1
1 0
1 0
OUT
Description
Operating mode of the memory function
GUID-BE6FD540-E96E-4F15-B2A2-12FFAE6C51DB v2
100 ms
10 20
Section 9
Logic
PID-3811-SETTINGS v5
IP11020-1 v2
M11485-3 v4
M11484-3 v2
307