Settings - ABB Relion 650 Series Technical Manual

Section 8
Control
8.3.11.4
Table 122: RESIN1 Non group settings (basic)
Name
FutureUse
Table 123: RESIN2 Non group settings (basic)
Name
FutureUse
8.3.11.5
252
Table 121: RESIN2 Output signals
Name
ACK_F_B
ANY_ACK
VALID_TX
RE_RQ_B
V_RE_RQ
EXCH_OUT

Settings

Values (Range) Unit
Bay in use -
Bay future use
Values (Range) Unit
Bay in use -
Bay future use
Operation principle
The reservation input (RESIN) function is based purely on Boolean logic
conditions. The logic diagram in Figure
created. The inputs of the function block are connected to a receive function block
representing signals transferred over the station bus from another bay.
Type Description
BOOLEAN All other bays have acknow. the reserv. req. from
this bay
BOOLEAN Any other bay has acknow. the reserv. req. from
this bay
BOOLEAN The reserv. and acknow. signals from other bays
are valid
BOOLEAN Request from other bay to reserve this bay
BOOLEAN Check if the request of reserving this bay is valid
INTEGER Used for exchange signals between different
ResIn blocks
Step Default
- Bay in use
Step Default
- Bay in use
113
1MRK 511 424-UEN B
Description
The bay for this ResIn block is for future
use
Description
The bay for this ResIn block is for future
use
shows how the output signals are
Bay control REC650 2.2 IEC
PID-3630-OUTPUTSIGNALS v7
PID-3629-SETTINGS v7
PID-3630-SETTINGS v7
M16503-3 v6
Technical manual