I103Fltprot - ABB Relion 650 Series Technical Manual

Bay control
Hide thumbs Also See for Relion 650 Series:
Table of Contents

Advertisement

Section 13
Station communication
13.7.6
13.7.6.1
13.7.6.2
560
Function status fault protection for IEC 60870-5-103

I103FLTPROT

Functionality
I103FLTPROT is used for fault indications in monitor direction. Each input on the
function block is specific for a certain fault type and therefore must be connected to
a correspondent signal present in the configuration. For example: 68_TRGEN
represents the General Trip of the device, and therefore must be connected to the
general trip signal SMPPTRC_TRIP or equivalent.
The delay observed in the protocol is the time difference in between the signal that
is triggering the Disturbance Recorder and the respective configured signal to the
IEC 60870-5-103 I103FLTPROT.
Identification
Function description
Function status fault protection for IEC
60870-5-103
Function block
IEC 60617
name
identification
I103FLTPROT
-
1MRK 511 424-UEN B
GUID-6D52F442-1592-4BA7-919C-0CD79046CAE5 v1
GUID-55593EC4-7AED-47A0-8311-DB22D013A193 v1
ANSI/IEEE C37.2
device number
-
Bay control REC650 2.2 IEC
Technical manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rec650

Table of Contents