1MRK 511 424-UEN B
13.5.4
Bay control REC650 2.2 IEC
Technical manual
IEC16000079 V1 EN-US
Figure 250:
Rear view of 1/2 x 19" casing with 1 TRM slot
There are two types of IO connectors: snap-in connectors for plastic fiber cables
and ST/bayonet connectors for glass fiber cables. The SLM can be equipped with
either type of connector or a combination of both connectors. This is identified by a
tag.
Connect the incoming optical fiber to the RX receiver input, and the outgoing
optical fiber to the TX transmitter output. Pay special attention to the instructions
concerning handling and connection of fiber cables.
Technical data
Table 421:
LON communication protocol
Function
Protocol
Communication speed
Station communication
IEC16000079-1-en.vsd
Value
LON
1.25 Mbit/s
Section 13
IP14442-1 v1
M11927-1 v2
545