Table of Contents
Advertisement
1MRK514019-UEN A
5.3.4
5.3.4.1
5.3.4.2
670 series 2.0 IEC
Installation manual
Side-by-side 19" rack mounting
Overview
IED case size 1/2 x 19" or 3/4 x 19" and RHGS cases can be mounted side-by-side up
to a maximum size of 19". For side-by-side rack mounting, the side-by-side mounting
kit together with the 19" rack panel mounting kit must be used. The mounting kit has
to be ordered separately.
Use only the screws included in the mounting kit when mounting the
plates and the angles on the IED. Screws with wrong dimension may
damage the PCBs inside the IED.
Mounting procedure for side-by-side rack mounting
5
IEC04000456 V3 EN
Figure 7:
Side-by-side rack mounting details.
The required torque for the screws is 3.5 Nm.
PosNo
Description
1
Mounting plate
2, 3
Screw
4
Mounting angle
5
Washer
1
2
3
4
IEC04000456-3-en.vsd
Quantity
2
16
2
16
Section 5
Mounting
Type
-
M4x6
-
M4x6
29
Advertisement
Table of Contents
