Settings - ABB Relion 650 Series Technical Manual

Section 9
Logic
9.8.8.3
Table 230: RSMEMORYQT Group settings (basic)
Name
Memory
9.8.8.4
9.8.9
322
Table 229: RSMEMORYQT Output signals
Name
OUT
NOUT

Settings

Values (Range) Unit
Off -
On
Technical data
Table 231: Number of RSMEMORYQT instances
Logic block
RSMEMORYQT
Set/Reset function block SRMEMORYQT
The Set-reset function (SRMEMORYQT) is a flip-flop with memory that can set or
reset an output from two inputs respectively. Each SRMEMORYQT function block
has two outputs, where one is inverted. The memory setting controls if, after a
power interruption, the flip-flop resets or returns to the state it had before the
power interruption. The SET input has priority.
SRMEMORYQT can propagate the quality, the value and the time stamps of the
signals via IEC 61850.
Table 232: Truth table for SRMEMORYQT function block
SET RESET
0 0
0 1
1 0
1 1
If Memory parameter is On, the output result is stored in semi-retained memory.
Type Description
BOOLEAN Output signal
BOOLEAN Inverted output signal
Step Default
- On
Quantity with cycle time
3 ms 8 ms
- 10
OUT NOUT
Last Inverted
value last value
0 1
1 0
1 0
1MRK 511 424-UEN B
PID-3812-OUTPUTSIGNALS v5
Description
Operating mode of the memory function
GUID-94C803B4-6C5A-4072-AB5C-20DDE98C9A70 v1
100 ms
30
GUID-D910BA2D-07FA-44C5-A820-E0413AD7FD91 v2
GUID-39060D4B-9AA7-4505-9487-88B2CBC534F0 v5
Bay control REC650 2.2 IEC
Technical manual
PID-3812-SETTINGS v5