Signals - ABB Relion 650 Series Technical Manual

1MRK 511 424-UEN B
9.7.10.2
9.7.10.3
9.8
Bay control REC650 2.2 IEC
Technical manual

Signals

Table 202: XOR Input signals
Name Type
INPUT1 BOOLEAN
INPUT2 BOOLEAN
Table 203: XOR Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN
Technical data
Table 204: Number of XOR instances
Logic block
3 ms
XOR 10
Configurable logic blocks Q/T
The configurable logic blocks QT propagate the time stamp and the quality of the
input signals (have suffix QT at the end of their function name).
The function blocks assist the user to adapt the IEDs' configuration to the specific
application needs. The list below shows a summary of the function blocks and their
features.
• ANDQT AND function block. The function also propagates the time stamp
and the quality of input signals. Each block has four inputs and two outputs
where one is inverted.
• INDCOMBSPQT combines single input signals to group signal. Single
position input is copied to value part of SP_OUT output. TIME input is copied
to time part of SP_OUT output. Quality input bits are copied to the
corresponding quality part of SP_OUT output.
• INDEXTSPQT extracts individual signals from a group signal input. The
value part of single position input is copied to SI_OUT output. The time part
of single position input is copied to TIME output. The quality bits in the
Default Description
0 Input 1 to XOR gate
0 Input 2 to XOR gate
Description
Output from XOR gate
Inverted output from XOR gate
Quantity with cycle time
8 ms
10
Section 9
Logic
PID-3817-INPUTSIGNALS v2
PID-3817-OUTPUTSIGNALS v2
GUID-0B07F78C-10BD-4070-AFF0-6EE36454AA03 v2
100 ms
20
GUID-0CA6511A-E8BD-416E-9B59-5C6BD98C60B7 v5
311