Ied Mounted With A Rhgs6 Case - ABB Relion 650 Series Technical Manual

1MRK 511 424-UEN B
16.4.4.3
Bay control REC650 2.2 IEC
Technical manual
The required torque for the screws is 3.5 Nm.
PosNo Description
1 Mounting plate
2, 3 Screw
4 Mounting angle
5 Washer

IED mounted with a RHGS6 case

A 1/2 x 19" size IED can be mounted with a RHGS case (6 or 12). The RHGS case
can be used for mounting a test switch of type RTXP 24. It also has enough space
for a terminal base of RX 2 type for mounting of, for example, a DC-switch or two
auxiliary relays.
IEC06000180 V2 EN-US
Figure 317: IED (1/2 x 19") mounted with a RHGS6 case containing a test
switch module equipped with only a test switch and a RX2 terminal
base
Quantity
2
16
2
16
1 2 1 2
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5
6 6 6 6
7 7 7 7
8 8 8 8
Section 16
IED hardware
Type
-
M4x6
-
M4x6
M11953-3 v4
IEC06000180-2-en.vsd
689