1. Installation CPV−DI02 and CPV−CS02
1.2.4 Recognizing the CPI extension with the SAVE button
1.2.5 Help table for setting the station number
1−10
When the SAVE button is pressed, the CPI/CP modules con
nected to the CPI extension connection will be recognized
automatically.
1. Prepare the connection of the CPV Direct to the power
supply (see section 1.5).
2. Read the sections 1.6 Extending the CPV Direct" and 1.7
Preparing the CPI system for commissioning" for the
exact procedure.
On the following pages you will find help tables for setting the
station numbers with the DIL switch.
Festo P.BE−CPV−DI02−EN en 0704NH